Do It Yourself Shed Plans Roofing 101 Home Improvement Journal

Do It Yourself Shed Plans Roofing 101 Home Improvement Journal

Home Decore, Remodeling, Articles and Photos

Do It Yourself Shed Plans Roofing 101

Do it yourself shed plans and roof 101 is written for those of you who know little or nothing about the roof, but need or want to know. I will discuss the basics of how the roof of a small building or shed. I want to give real facts and tips will be useful. One thing is for sure you need some sort of roof or cover for any kind of useful structure.Roofing not complicated but a lot of people do not know the basics of the roof. All the signs were put straw with the basic steps are the same, even if it is a small hut built do it yourself shed plans. Tips and information dedicated to all home owners and those who use it to make your own shed plans. The people who are the backbone of American ingenuity and can do attitude. What do we Americans really good. Getting done.

OK so after part of the roof structure, exterior surface is covered with a value, or a veil as it is called in the industry. Now only one layer of sheathing products. either plywood or particle board plywood. Another product called OSB particle board. Material, lumber or plywood sheathing nailed to the ceiling. It is what sustains last shingles.This floor or roof sheathing and shall be applied perpendicular to the ceiling. Each end of the roof surface or plywood, must rest on the pounds. In other words, each sheet of plywood or floor to share a kilo. Also they should be staggered so that no two layers together. To stagger the seams, At one end of the line you will have to cut the plywood in half. Then the next line on the other side should be cut in half. This ensures and maintains stagger.

The sheathing or surface is then covered with underlayment. This underlayment also called roofing paper or tar paper, asphalt saturated felt paper. Flashing is sheet metal products, which are used to help keep water from blowing under the roofing material. Placed on the roof and the flashing around the possibility of openings in the roof. Also flashing is used where the roof meets the vertical wall.Shingles types and qualities available. Also there is a different value and warranty. Shingles can only be used for hay slant. Shingles are sold by the square. A square will include a 100 square meter roof. the recommended underlayment for asphalt shingles # 15 saturated felt. Now that you have a roof underlayment after him, flashing, drip edge and all over the place, then the shingles can be applied. Actually, the easiest method and requires the least amount of work piece,

Start with the line under the tabs pointing up toward the high center.

The next step is to put another line in line with the tab facing down. Start this step with full shingle

Start this step shingles.When line half way up the other half began to take off in staggered tab shingles

Next start line half way up from the previous line, this line started full-time with shingle.

Do It Yourself Shed Plans Roofing 101 Home Improvement Journal

Make it a surprise, back and forth, all the way up

Perform the same steps for the other side.

There are several ways to create ridge caps. I recommend buying a good ridge cap and installed as directed. Its easy, fast, and with certainty.

I actually laid out and explained the process as possible. This step is important to secure the roofing job satisfactorily. The roof is not difficult, but it can be hard, hot work. A good roof is essential to protect your investment, whether it is a house, garage or shed is built to do it yourself shed plans.

Leave a Reply