The 20 Main Roofing Tools

The 20 Main Roofing Tools

It is highly important to have good, high quality roofing because your expensive carpet, stylish and comfortable furniture, well-built foundation, hard-wearing and solid walls and even that delicate shade of paint that is hard to get right will be a nightmare if you have a permeable and defective roof.

A sturdy roof over our head will gives us security, shield, and comfort. The most essential tools needed when working on the roof is a first aid kit. Be ready for all injuries that might happen while working on the roof because this work is a backbreaking, exhausting and the incidence of minor injuries is extremely high.

The first aid kit should include all kinds of bandages, antiseptic cleansing wipes, burn cream pack, scissors, and a first aid guidebook. Wearing a safety helmet while working on the roof may avoid or minimize a head injury because a single head injury can handicap a person for life or it can be fatal. This is the reason why while working on the roof safety helmets is also one of the most important tools in roofing.

Safety glasses and goggles is one of the essential tools in roofing because it protects our eyes from infectious particles that might enter our eyes while working. Always keep in mind that in any line of work, safety should be the first thing on your list, you should be equipped with all the necessary protective clothing and footwear for full on the job protection and injury prevention.

Shingling or roofing your house is a foremost responsibility of a homeowner and extreme carefulness is required with a little knowledge and the right tools, you can roof your home.

To be able to roof a house correctly and securely the following tools are needed — a sturdy ladder. You should take proper precautions while using a ladder because a ladder is one of the major causes of injuries and fatalities among the construction workers. To prevent untoward incidents, you should select the correct ladder for the specific work it will be used for and read and follow the instructions that go with the ladder. Set up the ladder properly and use good judgment while working on the ladder.

You may also need roof jacks in shingling a roof. The roof jack is a metal or wood bracket that is applied to support toe boards on a steep slope roofs. And it is specifically designed for lifting the hinged roof; this tool will make the installation of roof easier.

Using the right hammer for the roofing job will save you some time and effort. Roofing hammer is the hammer for a job specific tool. The face of this hammer is always pounded, often square and the peen will be either standard sharp hatchet for edging cedar shingles or it might be equipped with tiny razor blade for cutting asphalt shingles.

You may also need a utility knife for cutting roofing materials and a specific roofer’s utility knife has a knob that you turn to open the tool that will reduce the use of screwdriver to open and close the tool. Its blade is held in a place by a magnet that is hooked for cutting shingles.

For alignment purposes while roofing, you will need a chalk line. This is the line made on the roof by snapping an extended string or cord that is dusted with chalk. It will give the roofer a guideline when removing the excess shingle overhang.

Attaching roof to your house will be a lot quicker and simpler if you use a roofing nail gun. It fires nail to the wood or any other material that is specifically designed to take -it takes a fraction of second to hammer one nail. It carries off the hard work and the time normally involved in hammering large mounts of nails but you should be extremely careful in using this tool because though it is very useful, it is also dangerous if not handled it properly.

With a little knowledge, basic tools, and more precautionary measures, you will have a sturdy roof that will give you security and comfort for a long period of time.


Leave a Reply