How to Improve Attic Ventilation The Family Handyman

How to Improve Attic Ventilation The Family Handyman

Good attic ventilation lowers cooling bills, extends shingle life and reduces winter ice dams.

Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

User Comments

How to determine whether you need better attic ventilation

In the summer, good attic ventilation reduces heat buildup. That cuts cooling costs and prolongs shingle life. In the winter, warm, moist air seeps into the attic from the living space below. Good ventilation allows the heat and moisture to escape. That keeps your attic dry and reduces ice dams. Here are four signs of an unventilated or under ventilated attic:

  1. Look at your eaves and roof. If you don’t see any vents on the roof or in the eaves, you need to add some. Your roof vents may not look anything like the ones shown in this article. Your roof may have a ridge vent, which is a low profile, continuous vent running along the peak of the roof. Or it may have gable vents, which are louvered openings at the top of gables.
  2. Touch your ceiling on a warm, sunny day. A hot ceiling tells you that the attic is acting like a solar oven, raising your cooling bills and cooking the shingles.
  3. Thick ridges of ice on your eaves in winter are a sign of poor attic ventilation. Warm air that escapes rooms below gets trapped in the attic. Snow melts and the water refreezes on the cold eaves, creating ice dams.
  4. Warm air that escapes living space also carries moisture that will condense on rafters or roof sheathing. Grab a flashlight and inspect your attic during the winter. If you see dampness or frost, you need better ventilation.

For the best results, place roof vents near the roof’s peak and soffit vents in the eaves. Air flows in through the soffit vents and out through the roof vents. Vents come in various styles. We chose rectangular, hooded roof vents and rectangular soffit vents because they’re easy to install. Everything you need is available at home centers. Aside from vents, you’ll need a handful of 1-1/4 in. roofing nails, 1/2-in. galvanized screws for the soffit vents, utility knife blades, a dust mask and one tube of roofing cement for every three vents. You’ll cut holes for the vents with a jigsaw or reciprocating saw. Expect to spend a full day on this project. A cool day is best. On a warm day, attics can get dangerously hot. Heat also makes shingles easy to damage.

How to Improve Attic Ventilation The Family Handyman

How many vents do you need? First determine your attic area by multiplying the length by the width. A 30 x 40-ft. attic, for example, has an area of 1,200 sq. ft. Then aim for about 1 sq. ft. (144 sq. in.) of vent opening per 150 sq. ft. of attic. The building code lets you reduce that by half under some conditions, but more ventilation is usually better. The open area of a vent is sometimes listed on the vent as NFVA (net free vent area). If not, measure the size yourself. Roof vents will provide about half of the vent area and soffit vents the other half.

How to install roof vents

Photo 1: Mark vent locations

Center nails between rafters 18 in. from the roof’s peak. Drive nails up through the sheathing and shingles to mark vent locations. " class="step2enlargePic enlargePic" href="http://hostedmedia.reimanpub.com/TFH/Step-By-Step/FH04JUN_ATTICV_02.jpg"> Photo 1: Mark vent locations

Photo 1: Mark vent locations

Center nails between rafters 18 in. from the roof’s peak. Drive nails up through the sheathing and shingles to mark vent locations.

Photo 2: Cut the shingles

Photo 3: Cut the hole

Cut a hole in the roof sheathing with a jigsaw or reciprocating saw. Drill a starter hole so you can insert the blade to begin the cut.

Photo 4: Remove any obstructions

Photo 4: Remove any obstructions

Slip a pry bar between the shingles and separate the self-sealing adhesive. Then remove any shingle nails that prevent the vent from sliding into place.


Leave a Reply