Roof Walkway Mats — Recycled Rubber Walkway Roof Pads

Roof Walkway Mats - Recycled Rubber Walkway Roof Pads

Roof Protection Mats (rubber roof walk pads):

Roof walkway mats protect your roof and the crews who work on it! Our rubber walkway roof pads will withstand severe weather and provide excellent traction for maintenance personnel, even when wet. It is the ideal roof walkway matting.

With many industrial applications, these roof walkway pads are compatible with built up or single-ply roofing and, if spaced correctly, will not dam water. Every pad carries a 10 Year Limited Warranty and is available in multiple sizes.

Roof manufacturers recommend roof walk mats for all areas of high traffic or when servicing of roof top equipment is required at least once a month. Walkway pads are often required in front of access doors, roof hatches, ladders, etc. even in low traffic environments.

These eco-friendly recycled rubber walkway pads are flexible and provide many other uses in addition to roof mats for roof walkways (Several of these common applications are listed below). Rubber walkway pads are a multi-purpose product manufactured in the USA by recycling scrap tires. We are proud to keep these tires out of our country’s landfills.

  • Keeps work crews safe; reduces workplace injuries.
  • Provides excellent traction even when wet.
  • Can be installed easily on any flat roof.
  • Can be repositioned easily.
  • Requires no maintenance.
  • Commercial grade and shock absorbing.
  • Made using 100% Recycled Rubber.
  • Thickness: 3/4 or 1/2
  • Guaranteed to be free of manufacturing defects in material and workmanship. 10 year limited warranty.
  • Custom sizes available.

Optional Adhesive for Glue-Down Installation

Walkway pads may be affixed to the roof/floor by spot adhering with a one part polyurethane adhesive (e.g.ChemRex CX-948). Adhere all four corners and one spot in the middle — spots of adhesive should be at least silver dollar size. Do not use asphalt cut back adhesives! Please note that this adhesive will adhere extremely well to the rubber pads, but we cannot guarantee that the adhesive will hold equally well to the roofing/flooring material to prevent the pads from being blown or sucked off a roof!

Simply lay down the walkway pads and glue them onto the roofing/flooring with a caulking gun (CX-948). For larger installations, the adhesive can be obtained by the gallon for installation with a trowel (CX-941). These adhesives are a one-component polyurethane-based, structural, industrial grade adhesive. Elastomeric properties enable it to move with rubber as it expands and contracts. The patented formula is VOC compliant, non-flammable, and contains no solvents or water. It has freeze-thaw stability (unlimited cycles), and provides excellent initial grab, and outstanding bond strength. It is formulated for indoor and outdoor applications on concrete, asphalt, rubber, cork, plywood, particle or chip board, cement, gypsum underlayment, and over radiant heat flooring. When lightly misted with water, drying time is accelerated and will fully bond in just over 2 hours. Color: light brown.

ChemRex CX-948/941 forms a tenacious bond overnight:

Working or Open Time: Up to 1 hour

Firm Set: 1-2 hours

Handleable: 16 hours

Full cure: 7 days

Freeze/Thaw Stability: Does not freeze

  • CX-941 Polyurethane Adhesive — Trowel grade.


Leave a Reply