Top 10 Foam Roofing Myths Foam Roofing

Top 10 Foam Roofing Myths Foam Roofing

Many Types of Foam

According to the polyurethane foam association over 1.8 billion pounds of flexible polyurethane foam (FPF) products are produced annually in North America. There are many different types of foam out there; they are all based on altered forms of plastic filled with micro bubbles.

Some examples of FPF products are: polystyrene foam, polyethylene foam, styrofoam, and polyurethane foam. Polystyrene foam (often blue) is used in rafts, life preservers, and insulation wraps for residential homes. Polyethylene foam is used in cushions, pillows, and beds. Styrofoam is usually white, and typical uses are white foam for coolers, mugs, or cups (e.g. coffee/ or hot chocolate). Finally, polyurethane foam is a yellow type of foam for roofing, insulation, refrigeration warehouses, foam boards. Foam roofing is one of the most common polyurethane foam applications.

Foam Roofing Myths

There are probably as many myths as there are types of foam. Some of these misconceptions may be partly due to the fact that there are so many different kinds of foam. With about three decades of foam roofing experience we have heard some myths so absurd we wont bother listing them here. This article is an attempt to dispel some of the most typical myths and rumors about foam roofing. Without further adieu, here are ten of the most common polyurethane spray foam roofing myths, listed in no particular order.

Picture: A Sprayed Polyurethane Foam roof (SPF) installation on a warehouse. SPF foam roofing is plagued by myths and misconceptions .

Myth #1: Foam Roofing is New

Although the groundwork for polyurethane foam was done by Otto Bayer and his team in 1937, polyurethane foam would not become available until much later. In 1952 polyisocyanates became commercially and commercial production of polyurethane foam began in 1954 based on toluene diisocyanate (TDI) and polyester polyols. Commercial production of flexible polyurethane foam began in 1954, based on toluene diisocyanate (TDI) and polyester polyols. The invention of these foams (initially called imitation Swiss cheese by the inventors) was thanks to water accidentally introduced in the reaction mix. These materials were also used to produce rigid foams, gum rubber, and elastomers.

Dr. Otto Bayer began working with polyurethanes in 1937. However, it was not until further innovations, and Walter Baughman’s discovery of the Blendometer in 1953 that mass production of polyurethane foam began. As a product, polyurethane foam is over half a century old.

Initially polyurethane spray foam was used in the 1960s for refrigeration and industrial insulation projects, although by the late 60s and early 70s polyurethane foam had evolved into exterior roofing applications. The earliest foam roofs are now around 50 years old. So, as a product, polyurethane foam has existed for the better part of a century, and it has been in use on roofing in applications for about half a century. For most of the living world, foam roofing is indeed not new.

Myth #2: You Can’t Stop a Determined Bird From Pecking a Foam Roof

This is very much a myth, and if you believe it, you should be ashamed. Now, keep in mind that If you have a sadly deteriorating foam roof, with large patches of exposed foam (where the acrylic coating has worn away), then birds may peck at your deteriorating and exposed foam.

One popular foam roofing myth involves birds pecking a foam roof into oblivion.

However, it’s very easy to stop the birds from doing this (i.e. the "can’t stop" part is a myth). Simply replace the coating with a fresh layer or use some acrylic caulking to seal up the exposed area. Once a layer of rubberized coating covers the foam, the birds wont bother the roof. If you do find a bird pecking at your foam roof, think of it as a compliment. Even a birds brain is smart enough to realize that foam is both lightweight and has great insulating qualities (e.g. for a nest).

Myth #3: You Can’t Walk on a Foam Roof

You CAN walk on a foam roof without having the skills of those ninjas that walk on rice paper; just leave your spiked heels and cowboy boots in the closet—its best to use soft rubber sole sneakers. Unless you’re walking on a condemned (or soon to be) building, a foam roof is completely capable of sustaining the weight of a normal person.

Employees walk on an SPF foam roof while making an inspection.

Soft sole shoes are advised because an extremely sharp object can damage or penetrate the foam. Since spray foam roofing structure is composed of millions of tiny closed cells, only a hole in the roof that penetrates to the underlying substrate can potentially cause a leak. However, foam can only last forever if it is protected from UV rays (sunlight). If your foam roof has a hole or is damaged, a proper type of coating or caulking should be used to coat the roof again and protect it from UV rays.

Myth #4: Foam Roofing Material is Just Like Memory Foam Mattress Material

Sure, and monopoly money is accepted by your local bank. On a more serious note, memory foam mattresses are very low density and open cell, while foam roofing foam is still flexible, it is relatively much higher density and composed of closed cells. Polyurethane closed cell foam used in roofing applications is a completely different material composition vs memory foam. Polyurethane foam used for roofing applications is exponentially stronger and more durable than the type of foam used in a mattress. For example, Dura-Foam has many roofs approaching the 31 year mark which are still in near perfect condition.

Myth #5: Foam Roofing is Expensive

A foam roof actually costs about the same as a typical BUR or single ply roof. Also, consider that BUR or Asphalt roofs are actually an oil based product. Rising oil prices are driving up the costs of most typical flat roof alternatives, while the cost of foam roofing has remained more constant. An additional benefit to consider, is that a foam roof is the last roof you’ll ever need to buy. Furthermore, a foam roof provides exceptional insulation, and we always use reflective cool roof coatings (on completed foam projects) which results in even further reduced energy costs. Cool roof coatings alone can cut down cooling costs by 30 percent or more in warmer climes.

If you’re only considering a 5 or 10 year window, a foam roof may or may not be more expensive than a traditional roofing material. However, when you start considering 15, 20 or more years in your evaluation, the foam roof becomes much more cost effective than other alternatives. You wont need to replace the foam roof in 20 years—you can simply maintain a foam roof by periodically adding re-coats to protect the roof from prolonged UV exposure. This is not a viable option with a traditional roofing installation.

Myth #6: Foam Roofing is Not Durable

When you think about ‘tough’ materials, foam products probably don’t come to mind. However, Dura-foam has built many 30 year old (and counting) foam roofs which remain in great condition. Many of the earliest foam roofs are still standing (50 years and counting). Foam roofing has already stood the test of time, and its a fact; a foam roof can last the life of your building.

Top 10 Foam Roofing Myths Foam Roofing

Image: This is a pair of polyurethane soled shoes. Polyurethane is often used in the soles of shoes due to its extreme durability.

Mtyth #7: Foam Boards Insulate as Well as a Sprayed Foam Roof

Not really—whether you DIY (Do-it-Yourself) or have a contractor install a foam board roof, you’ll only see a fraction of the benefits possible with sprayed foam roofing. Sprayed foam roofing is manufactured on site, and is sprayed to perfectly conform to your roof as a single monolithic barrier to the elements. A foam board roof is full of seams which allow moisture and vapor transmission, which greatly reduces the insulation capacity.

Although the R-value rating of a foam board roof appears to be on par with a foam roof, the actual performance of such roofs is substantially inferior. In other words, in this case, the R-value of the insulation does not factor air-infiltration with thermal resistance which makes it an inaccurate comparison. One should also consider a sprayed foam roof also seals a roof better (prevents leaks) better than any traditional pre-manufactured material (even foam boards).

Myth #8: Polyurethane Foam is Toxic

Here’s just one more myth to add to our list. Polyurethane foam is really just a form of altered plastic with millions of tiny trapped air bubbles. Although the formulation is designed for roofing applications and optimized for the best combination of thermal resistance and durability, the base material is the same thing used in most refrigerators or foam mattresses. Polyurethane foam materials are completely inert, and are just as safe as the foam pillows you probably have on your couch by your TV or in the seat cushions inside your car.

Myth #9: Soy Foam is Substantially ‘Greener’ Than Polyurethane Foam

We have looked at the most recent Soybean oil based foams, and they presently contain a maximum of about 15% soybean oil. Considering the expense, and the risk that these formulations wont stand the test of time (last the life of your building), we are not completely sold on this product.

Perhaps one day, Soybean oil based foams will be substantially different from traditional foam. For now, its 85% exactly the same as your every-day polyurethane foam, and for us, it’s not enough to justify the added expense. Although we will look for new developments in bio-based foams in the future, our present conclusion is that soy (and other bio-based) foams are just a gimmick. Once technology changes and the second generation of soy based (and other bio-based) foams are released, we will re-visit the subject.

Myth #10: Foam Roofing Absorbs Water

If foam on a roof system is found to soak up water, either the wrong material was used or the material components were not applied using the proper equipment and expertise. The Spray Polyurethane Foam (SPF) used in roofing applications is "closed cell". In other words, it is a plastic with millions of tiny closed cells which are impenetrable by water. A block of SPF submerged under water will remain buoyant and dry indefinitely. For this reason, spray polyurethane foam is used in flotation docks and the hulls of sea vessels. In roofing applications, closed-cell SPF is manufactured at the job site using specialized equipment. Foam that soaks-up water is not classified as "closed cell" SPF.


During the last few decades foam roofing has grown in popularity and become the flat and low slope roofing material of choice for environmentally conscious consumers. Unfortunately, there are some obstacles for foam roofing contractors due to large amounts of misinformation that have propagated through society. There are many foam roofing myths; the ones we have listed here are just some of the most common ones. Foam roofing is truly a highly quality, high performance product. Hopefully this article will help at least a few people separate fact from fiction in reference to foam roofing.

Leave a Reply