Types of Roofing Nails eHow

Types of Roofing Nails eHow

Ring Shank Nails

One type of roofing nail is the ring shank nail. The head on this nail is larger than the head on standard nails, which ensures that shingles are held fast and don’t rip away under adverse conditions, such as strong winds. These nails are covered with a electrogalvanized surface. The ring shank nail is used primarily for asphalt roofing felts. The ring shank roofing nails can be made from a variety of substances including electrogalvanized carbon steel, as well as zinc-plated steel. Other materials include stainless steel, copper and aluminum.

Screw Shank Nails

Screw shank nails are used for wood and pallets primarily. The surface of the nail can be hot dipped and galvanized. If you need a nail that has the ability to hold items more securely, then screw shank nails should be used. The twisted shank gives these screws an advantage when it comes to securing a roof. Another characteristic of these nails is the flat head along with the diamond tip point. This enables it to penetrate roofing material easier. Wood or shingles are less likely to split when a roofing nail with a sharper tip is used, because there is less stress when it penetrates.


If nails are made from galvanized material, they are more likely going to last longer because it takes a long time for rust to corrode them. Any nails made from stainless steel are better suited for slate and tile roofing surfaces. Aluminum nails should be used for surfaces made out of metal and siding. If you have a traditional roofing surface, then you may want to use roofing nails made from copper.

More Like This

You May Also Like

Roofing nails, sometimes called shingle nails, vary in specifications depending on the planned type of shingles and the roofing materials already present.

Types of Nail Gun Nails. Just like the nails not used in nail guns. Roofing nails are a specialized nail with.

Replacing the shingles on your roof is a relatively simple do-it-yourself job. If you've never installed shingles on a roof before, you.

There are a number of roofing nails, which are made out of different materials and used for different roofing surfaces. Roofing nails.

A Paslode roofing nail gun is designed specifically for fastening roofing shingles to the roof of a house or garage. Nail.

Types of Roofing Nails; How Many Nails Per Board in Roof Sheathing? Print this article;. Roofing nails, which fasten shingles to.

It is extremely important to take care of your roof. A damaged roof can lead to much more serious problems and end.

Installing shingles correctly can usually be done relatively easily. If you live in an area with high winds, however, installing shingles can.

A proper nailing pattern and technique prevents shingles from loosening and pulling away from a roof, particularly during high winds. Although nailing.

Types of Roofing Nails eHow

There two main types of nail gun that use different types of nail magazines. The Stanley SRN175 is considered to be.

In addition to shingle type. Aluminum or electro-galvanized steel nails are the most common nails and are used for asphalt shingles.

Roof sheathing is the surface of which roof material is mounted, and the proper amount of fasteners (roofing nails) is vital in.

Roofing nails, which fasten shingles to your roof, have a crucial job when it comes to protecting your house. Without the nails.

How to Install & Nail Down Roll Roofing. Unlike other types of roofing. Putting shingles on a flat roof is probably.

Roof sheathing prepares your roof prior to the installation of shingles. Sheathing also serves as added protection against wind, rain, snow and.

The roof must be sheathed with exterior grade sheathing fastened with 8 penny nails at 6 inches on center along the edges.

Roofing nails are short and squat, with wide heads. These types of construction nails are usually galvanized—that is, coated with zinc.

. but it makes sense that nailing roofing felt will hold it more securely should the shingles come loose. It is quicker.

Leave a Reply