Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents — Smoke Ventline Enclosed Trailer

Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - Smoke Ventline Enclosed Trailer

Ventline Enclosed Trailer Parts — BV0554-03

Features:

  • Replacement cover for 14-1/4 x 14-1/4 roof vents
  • Domed cover
  • Easy to install and operate
  • Smoke color
  • Made of a polypropylene plastic
  • Fits Standard Ventadomes and Post-1995 Elixir Trailer Roof Vents

BV0554-03 Ventline Replacement Smoke Dome Assembly for Standard Roof Ventadomes (old style, rounded dome)

Video Transcript for Ventline Enclosed Trailer Parts BV0554-03 Review

Ask the Experts about this Ventline Enclosed Trailer Parts

You will first want to measure your vent, not the actual cover on your trailer. The vents are 14-1/2 by 14-1/2 inches, 14 by 14 inches, or 13 by 14 inches, in size. Then you will want to make sure the correct size cover uses the same type of hinge as shown on the product page. Usually it will be a rolled metal edge, and you will be able to use the picture on our site to compare to your cover. The item you selected, Ventline Smoke Dome, part # BV0554-03, is a replacement cover for.

view full answer.

Most all of the vent covers are similarly sized. You will need to select the vent cover for the vent on your 6×12 Pace Journey trailer by the manufacturer of the vent cover and the attachment style. Some of the vent cover manufacturers, like Ventline have changed attachment hardware in the past and there are two styles. The older style, like the Ventline Replacement Smoke Dome Assembly for Standard Roof Ventadomes, item # BV0554-03, that you selected have the metal groove riveted to.

view full answer.

I found the style of roof vent that you need. You need the Ventline # BV0554-03 vent. Check out the picture I attached that shows the number that you referenced on this vent. If you want the white version of this roof vent lid you would want a Ventline Roof Vent Lid # BV0554-01.

You may be able to just replace the vent cover. You would need to know the vent manufacturer and its approximate age. This information may be on the vent somewhere. If you cannot find this information, you will need to look at the type of hinge you have and then compare that to the pictures of the hinges for the covers we carry on the product pages. The cover you have referenced, # BV0554-03, is designed for Standard Ventadomes and Post-1995 Elixir Trailer Roof Vents. Replacing the.

view full answer.

Converting from a double swing doors to a ramp door can definitely be done, it will require some fabrication and ingenuity on your part. I can help you pick out some of the more important components needed for this, but I will not be able to tell you every step of the way. The first thing you will need is a ramp/door. You will want to measure the opening of the rear of your trailer to get the correct size for the ramp. Without knowing how much weight will be on the ramp it is hard to.

view full answer.

You will need to check the hinge style on the vent to make sure that the Ventline replacement dome assembly # BV0554-03 would be the correct replacement piece for your particular model of vent. There are two styles of smoked dome vent covers that we offer. The # BV0554-03 that you referenced features a lower profile dome on the cover and uses a hinge that runs the length of one of the sides of the vent cover. The other style vent cover has a taller dome on the cover that has kind.

view full answer.

I called and spoke with Forest River, maker of the Continental Cargo trailers. She stated that they use Elixir vents. So that information really helps narrow down the possible options for replacement vent lids. Since you have a trailer made after 1995, the correct vent should be the Vent Cover for Ventline and Post-1995 Elixir Trailer Roof Vents, # BV0554-01. We also have a model in smoke, # BV0554-03. To be sure, you can try to find the manufacturer name on the vent itself.

Measuring the vent is the first place to start. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the the vent. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, item # BV0554-03, that you referred to then that is most likely the correct vent for your.

view full answer.

When measuring for a replacement vent lid, you will want the outside dimension of the housing that extends through the trailer roof. This dimension is typically 14 by 14 inches. Closely examine the remaining portion of the vent, looking for a manufacturer name or model number. If you cannot find that information, you can examine the replacement lids we offer (see link) and match them up by the dimension of the housing and the style of hinge. Each replacement lid will have a detailed.

view full answer.

To determine the correct replacement vent cover, if available, you will need to look at the hinge style and the size of the vent the lid fits on. For example, lid # BV0554-03 has 1 long continuous hinge and fits 14-1/4 by 14-1/4 inch roof vents. There are also 3 point and 4 point hinges as well. I have linked all of the replacement lids we carry so you can look to see if we have a match for your vent.

The best way to find the correct replacement vent cover for your Pace cargo trailer is to first measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, item # BV0554-03, that you.

view full answer.

I have located three possible solutions, including the option you originally requested for your Itasca Sundancer. We have three non-powered roof vent covers that may work for you. I attached a photo showing covers and dimensions for you to make the correct selection. For the Ventmate, # 69284, that you originally asked about, I have given you the hinge dimensions as well as the center dimensions. For this part the hinges are molded plastic. Another option we offer is the Ventline,.

view full answer.

The Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BV0554-03 that you referenced is designed to work on 14-1/4 inch by 14-1/4. This cover will fit standard Ventadomes and Post-1995 Elixir trailer roof vents. The other option you have would be a Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent # BVD0449-A03. The big difference is that this lid uses three individual hinge clips, whereas the # BV0554-03 uses one continuous hinge. Check out the picture.

Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - Smoke Ventline Enclosed Trailer

view full answer.

The smoke might let a little more light through it, but nothing that noticeable. And aside from that either color does not have the reputation as lasting longer than the other. The white version is part # BV0554-01 and the smoke version is part # BV0554-03. If you check out the pictures I attached you will see the differences in how the light comes through the cover.

I could not find a reference to the # CS610SA vent you mentioned. The best strategy for finding a replacement is to measure the outside dimensions of the roof vent and take note of the hinge configuration. Then, look for a replacement that uses the same hinge configuration and is the same size. Unfortunately, I do not have any reference information showing which model years of trailer or camper used what model number vent cover. If you would care to get an outside dimension of.

view full answer.

The 14-1/4 inches is measured on the inside of the vent cover part # BV0554-03. Check out the picture I attached to see what I mean.

It sounds like the Ventline Replacement Smoke Dome Assembly # BV0554-03 that you referenced would be the correct vent for you if the hinge and cross member of your vent roof looks identical to the # BV0554-03 that you referenced. Size wise I think you are good, you said the opening of the vent is 13 inches by 13 inches, and the overall lid dimensions are 15 inches by 15 inches. This would put the vent dimensions at around 14 inches by 14 inches if I understood you correctly. Most roof.

view full answer.

Based on the information that you have provided you can use Ventline roof vent lid # BV0554-01 for white or # BV0554-03 for smoke. I have included a picture of the smoke version that shows the numbers on it.

We may have the correct vent cover for your 2010 Pace trailer but the way that replacements are listed is not by trailer make and model, it is by Vent make and model. The problem with that is that it can be difficult to tell which vent you have. Pace might know but if they do not then we will have to go by the dimensions of the old lid and the hinge style. For example, vent lid # BV0554-03 has one long continuous metal hinge and fit 14-1/4 inch x 14-1/4 inch roof vents. I have included.

view full answer.

I contacted the parts folks at Heartland, and was told that your 5th wheel was originally equipped with an Elixir roof vent. We do offer replacement lids, in smoke as part # BV0554-03 or white as part # BV0554-01.

I found the style of roof vent that you need. You need the Ventline # BV0554-03 vent. Check out the picture I attached that shows the number that you referenced on this vent. If you want the white version of this roof vent lid you would want a Ventline Roof Vent Lid # BV0554-01.

It actually sounds like you need cover # BV0554-03 which has the continuous hinge and the track for the arm. But I assume that the track for the arm does not match this style. I have linked the replacement covers we have but none of them have all three features you are looking for in one lid: continuous hinge, Pre-1995 arm track, and fit 14-1/2 square vents.

The best way to find the correct replacement vent cover for your Pace cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03, that you referenced,.

view full answer.

The best way to determine if a replacement vent cover will fit your current vent is to measure the vent opening or the old vent and compare the hinge style. The Ventline Vent Cover, # BV0554-03, fits a 14-1/4 inch x 14-1/4 inch roof vents and was designed for standard Ventadomes and Post-1995 Elixir trailer vents. This vent uses a continuous rounded metal hinge and a metal guide arm. I have attached a review video and an installation video that shows how to install this vent cover. If.

view full answer.

We offer both a range of replacement vent covers as well as complete trailer vent assemblies. I have provided a link to our main page for replacement lids where you can use the filters in the left-hand margin to select the characteristics for your vent. The main thing to consider is the hinge type, either 3-point, 4-point or continuous type hinge. In the event that you cannot find the replacement lid you need you can use the other link provided to view all complete vent assemblies..

view full answer.

To find the correct replacement cover, if available, you will need to go by the dimensions of the old cover and the hinge style. There are different hinge styles: 3 point hinge like # 62008, 4-point hinge such as # 61628, and a continuous hinge like # BV0554-03. All of the replacement vent lids we carry are 14 inches square with the exception of # 62008 which is 13 inches by 14 inches. I have included a link to all of the replacement vent lids we offer. If you are unable to locate.

view full answer.

If you believe that the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents, # BV0554-03, is the correct replacement for you then you will need part # BV0554-01 for the white cover. The Ventline Vent Cover, # BV0554-01, fits post-1995 Elixir trailer roof vents, Ventline pre-2008 trailer roof vents and is a replacement for 14-1/4 inch x 14-1/4 inch roof vents. I recommend verifying the outside measurement of your roof vent and also see if you can locate the manufacture name.

view full answer.

In order to determine if we have a replacement lid that will fit you are going to need to check a few things on the existing vent. This means that you will have to have the trailer present I’m afraid. All of the replacement lids we carry are 14 x 14 inches, except for # 62008 which is 13 x 14 inches. I have included a link to all the lids we carry. Then, if the measurements work out, you have to go by the hinge style. The lids we carry will have a 3 point hinge, like # 62008, a 4 point.

view full answer.


Leave a Reply