Instructions for Roofing eHow

Instructions for Roofing eHow

Lay Your Felt

Affixed to the front edge of the roof is a drip edge. This is a long metal piece that holds the front edge of the roofing slightly out over the end of the roof to prevent water from seeping back up. Roll out your roofing felt horizontally along the edge of the roof, hammering in a nail every few feet. The front edge of the felt should come right to the outside of the drip edge. Run a bead of roofing tar under the front edge of the felt. Roll out the second course of felt so that the lower edge overlaps the first row by an inch or two. Continue up the roof with additional rows until it’s completely covered.

Lay the Shingles

Starting at one end, lay a full shingle along the top of your starter strip, so that the ends of the three tabs on the lower half the shingle are even with the edges of the starter strip. Sink nails every 4 to 6 inches. Lay the next shingle next to it, and work your way across the front edge. For the second row up, set the shingle so the three tabs cover the top half of the shingles on the first row, but don’t cover the tabs of the first row. Stagger the shingles, so the groove between the shingles on the first row meets the middle of the tab above it. Continue across the roof and build up in rows.

More Like This

You May Also Like

Asphalt is used in many roofing materials for residential homes. Materials such as fiberglass rolled roofing, modified bitumen, asphalt shingles, 90-pound felt.

Building a roof for a house can be a daunting task and is most often left to professional contractors, but it is.

Rubber roofing, most commonly found on flat roofs, is environmentally friendly, durable and energy-efficient. It is also low-maintenance compared to many other.

Metal roofing is a commonly used material for several reasons ranging from low cost to durability. The installation of metal roofing is.

Underlayment or roofing felt is used under shingles. Rarely if ever is the tar-coated paper placed under a metal roof. Typically roofing.

Three-tab shingles are some of the easiest shingles to install. They are called three-tab shingles because the 36-inch long shingle is divided.

A shed roof is one that has a single sloping side. When shingling a shed roof with three-tab shingles (the standard, asphalt-covered.

Rolled roofing installation is one of the most straight forward roofing projects you can undertake. The material is more appropriate for sheds.

Roll roofing serves as a quick and simple way to cover a small roof or shed. Because it works on relatively flat.

When it comes to roofing, the most common way to refer to a flat of shingles is to call it a square.

Finishing a doll house requires patience and attention to detail. You can build a dollhouse from a kit, or purchase a pre-fabricated.

Probably no home improvement is as tough yet satisfying as re-roofing your house yourself. If you happen to have an extremely steep.

Insulating roofs is one of the most important insulation jobs in the house, since heat rises and most heat loss tends to.

Putting shingles on a flat roof is probably not the best way to go, but in the event you decide you want.

Roof felt paper, which is also called underlayment and asphalt-saturated felt, sits under the shingles and creates an additional waterproof barrier on.

Fiberglass shingles are a common roofing material used in the United States. They resemble asphalt roofing shingles, and are also available in.

Synthetic rubber roofing is faster to install than traditional roofing material. As a result, it is a popular do-it-yourself roofing method, especially.

Lay Your Felt

Affixed to the front edge of the roof is a drip edge. This is a long metal piece that holds the front edge of the roofing slightly out over the end of the roof to prevent water from seeping back up. Roll out your roofing felt horizontally along the edge of the roof, hammering in a nail every few feet. The front edge of the felt should come right to the outside of the drip edge. Run a bead of roofing tar under the front edge of the felt. Roll out the second course of felt so that the lower edge overlaps the first row by an inch or two. Continue up the roof with additional rows until it’s completely covered.

Lay the Shingles

Starting at one end, lay a full shingle along the top of your starter strip, so that the ends of the three tabs on the lower half the shingle are even with the edges of the starter strip. Sink nails every 4 to 6 inches. Lay the next shingle next to it, and work your way across the front edge. For the second row up, set the shingle so the three tabs cover the top half of the shingles on the first row, but don’t cover the tabs of the first row. Stagger the shingles, so the groove between the shingles on the first row meets the middle of the tab above it. Continue across the roof and build up in rows.

More Like This

You May Also Like

Asphalt is used in many roofing materials for residential homes. Materials such as fiberglass rolled roofing, modified bitumen, asphalt shingles, 90-pound felt.

Building a roof for a house can be a daunting task and is most often left to professional contractors, but it is.

Instructions for Roofing eHow

Rubber roofing, most commonly found on flat roofs, is environmentally friendly, durable and energy-efficient. It is also low-maintenance compared to many other.

Metal roofing is a commonly used material for several reasons ranging from low cost to durability. The installation of metal roofing is.

Underlayment or roofing felt is used under shingles. Rarely if ever is the tar-coated paper placed under a metal roof. Typically roofing.

Three-tab shingles are some of the easiest shingles to install. They are called three-tab shingles because the 36-inch long shingle is divided.

A shed roof is one that has a single sloping side. When shingling a shed roof with three-tab shingles (the standard, asphalt-covered.

Rolled roofing installation is one of the most straight forward roofing projects you can undertake. The material is more appropriate for sheds.

Roll roofing serves as a quick and simple way to cover a small roof or shed. Because it works on relatively flat.

When it comes to roofing, the most common way to refer to a flat of shingles is to call it a square.

Finishing a doll house requires patience and attention to detail. You can build a dollhouse from a kit, or purchase a pre-fabricated.

Probably no home improvement is as tough yet satisfying as re-roofing your house yourself. If you happen to have an extremely steep.

Insulating roofs is one of the most important insulation jobs in the house, since heat rises and most heat loss tends to.

Putting shingles on a flat roof is probably not the best way to go, but in the event you decide you want.

Roof felt paper, which is also called underlayment and asphalt-saturated felt, sits under the shingles and creates an additional waterproof barrier on.

Fiberglass shingles are a common roofing material used in the United States. They resemble asphalt roofing shingles, and are also available in.

Synthetic rubber roofing is faster to install than traditional roofing material. As a result, it is a popular do-it-yourself roofing method, especially.


Leave a Reply