Roofing Companies in Atlanta, G may not be a roofer from Atlanta but you are welcome to join

Roofing Companies in Atlanta, G may not be a roofer from Atlanta but you are welcome to join

Toe Boards Your Roofs Hidden Problem

Toe boards have been used forever. Just in case you dont know what a toe board is in the roofing world these are

Yes toe board holes are this small!

typically 2x4s that are nailed on top of the shingles to give the roofer support on steep pitches.

These toe boards are clearly a safety devices. No toe board No Roofer. Without this support the roofer slides right off the roof. It may not happen today or next year but eventually one roofer is going to slip without the help of this support board.

Simple enough toe boards are must! If you are roofing in Atlanta like EverDry Roofing is then you know that every residential roof you stand upon is steep. You cant afford not to have this type of support. Add in an old roof with loose asphalt granules, a little morning dew, the pure unrelenting heat of a Georgia afternoon and a lot of sweat and someone without support is sure to fall.

So what is Your Roofs Hidden Problem when using toe boards?

The problem is you cant place a 24 in a horizontal position on a asphalt shingle roof with nails and expect it not to leak in just a few short years. If the shingles are pliable enough they may self-seal for a while and if the roofer remembers to reseal the holes with roof cement you may actually get a few years out of it. But eventually as you can probably guess it is not a good idea to poke holes into a brand new roof.

The picture shown above has happen throughout my entire neighborhood. This community is about 18 years old and everyones roof is failing in the same manner. These very small holes caused a whole lot of damage. We all should have gotten 25 years out of these structures but it was not to be The dreaded toe boards holes were not resealed.

There are alternatives to the old toe board system!

Dont think that since there are alternatives to the toe boards that all roofer are being sold or even being taught how to use them. While studying other articles for this practice of nailing toe boards I ran into a current DIY website that mentioned the same thing.

David Peterson Editor Roofing Atlanta and Remodeling Atlanta

HOMEOWNER ROOFING TIP

There is a pretty good chance that at least once in your life you will experience a roof leak. And unfortunately you notice that leak when it is raining and causing damage on the inside of your house.

So if you are like me you will probably try to take care of the problem yourself. If you know where the leak is coming from but the surface is still wet which product should you use?

Try Henry 208R. HE208R is a Rubberized Wet Patch Roof Cement.

Repair holes, cracks, and splits on composition, mineral surface cap sheet, asphalt coated, SBS modified, metal, and masonry roofs. Also use it to seal leaks and openings around flashing, chimneys, vents, skylights, joints in metal edging and gutters.

Again this product can be applied onto WET surfaces.

The product is ready to use out of the can. The only real surface prep is to clean the roof with a brush to remove lose gravel. If there is other patch material applied at a previous time then that will need to be cut out before applying this patch cement.

Clean up with mineral spirits.

Good luck on your next roof repair OR call a roofing professional.

5 Gallon Water Bottle Carrier

Its hot on this roof!

Your crew needs a lot of water during the summer. You are probably carrying around several 5 gallon coolers of water at any one time.

With the summer heat fast approaching you probably want to put water consumption at the top of the list of your crews needs. We cant have them falling off the roof due to dehydration.

If you are purchasing water from a bottle water company then you have probably experienced just how heavy those 5 gallon containers are. They each weight about 55lbs.

To make matters a little harder they are big and round and are not that easy to carry.

I ran into a company the other day that created a 5 gallon bottle carrier. This simple and inexpensive device slips right around the neck of the bottle and you just pull on your handle to secure it. This will keep your workers from having to lean over which can strain their backs.

If you are purchasing from a water company then my advice is that you give this a try. It certainly makes it easier to carry the water.

Todays Roofing Options Whats New and Whats In

Posted By: Remodeling Atlanta / Written by: Ernest Jarquio

Roofing Companies in Atlanta, G may not be a roofer from Atlanta but you are welcome to join

Roofing is one of the most important aspects of home and building construction as most structures would need something to serve as shelter. It is not surprising how roofing has developed over the course of history and even so just over the past two decades. As more homes are being built, more options of roofing have sprouted as well. This fills the several requirements, not only of function, but also of aesthetics. It is amazing to observe how many choices a homeowner can make when it comes to roofing.

The Built-up Roof

If there is one roofing option that is considered a classic, it would most definitely be the built-up roof system. Developed for over a century ago, this type of roof has a time-tested reputation that makes it almost an automatic choice for a lot of home builders. Of course, this is not a perfect roofing option as it can pose some considerable limitations, but a lot of those who chose this type have seen it work quite well.

The built-up roof is generally preferred in places of high traffic and when there is a possibility for the roof to be subjected to mechanical abuse. The built-up roofs membrane is generally thicker and stronger compared to most other roofing options with its multiple layers and gravel surfacing. Since this is a popular choice, it is usually easy to find a contractor who can handle both installation and repair of this roof type in most locations.

The main disadvantage with built-up roofs is inflexibility. The roof may be subject to damage due to structural or thermal movement. A long building would need additional roofing support to prevent the roof from damage due to contraction. The compression due to cold temperatures or stretching due to hot temperatures may also take a toll on built-up roofs. Much care is needed if these factors are pronounced in a particular area.

Modified-Bitumen Roofing Systems

Modified-bitumen roofs have similar advantages and disadvantages as built-up roofs. However, one great advantage of this roofing option is that it performs significantly better during cold weather. This type of roofing has been developed to become flexible when the temperature is low. They can adapt to temperature changes better than the built-up roof.

There are two type of modified-bitumen roofs the plastic-based ones (APP) and the rubber-based ones (SEBS and SBS). The plastic-based membranes are usually installed using torches while the rubber-based membranes are installed using cold adhesives or hot asphalt. Most modified-bitumen roofs already have granulated surfaces so they are lighter than built-up roofs that have gravel surfaces. Modified-bitumen roofs may also be added as cap sheets on top of existing built-up roofs. This adds redundancy to the roofing as well as some flexibility.

Single-Ply Roofing Systems

Singly-ply roofing, as its name suggests, is comprised of a single layer make of plastic or elastic material. Because there is only one layer, this type of roofing is thick. There are two types of single-ply roofs, first, thermoset membranes whose seams are sealed using adhesives and second, thermoplastic membranes whose seams are welded using heat or a solvent. There are three types of attachment for single-plys ballasted, loose-laid and fully adhered. Because of its light weight, the single-ply is often used for re-covering. They are also quite inexpensive.

Single-ply roofs may be sensitive to certain substances and great care should be taken when choosing from different kinds of single-plys. EPDM and PVC-based materials can be damaged when exposed to oil, jet fuel, and cooking grease. When there are such emissions in the area, the chemical composition of the single-ply membrane should be checked carefully.

Metal Roofing

Metal roofing is no longer limited to those leaky sliding panels attached together rather insecurely and then screwed or nailed to a frame. Today, there are metal roofs that have more secure concealed clips that can be expanded or contracted. Perhaps the most important factor for choosing metal roofing is its life expectancy: metal does not decompose or break down even with exposure to extremes in weather. Some metal roofing may have warranties of up to 50 years. The disadvantage with metal however is the greater possibility of leaks compared to other roofing options. If metal is not installed properly, leaks are likely to occur.

There are several other roofing options these days. It is just important to choose the right type for the right structure. Whether it is new or a classic, good roofing should serve its purpose of providing good coverage.

About the Author:

Ernest Jarquio is a dedicated family man hopelessly addicted to do-it-yourself projects. For more information, visit his website, where he discusses various subjects such as different roofing options. EPDM roofing and standing seam roofing .


Leave a Reply