How To Pick Roof Color — Let Hue Bias Be Your Guide

How To Pick Roof Color - Let Hue Bias Be Your Guide

Choose roof color to coordinate with fixed, permanent elements on your house.  If you think it’s possible to choose a neutral roof color that will go with everything, you’re wrong.  Gray looked like a safe color choice to this homeowner.  But it wasn’t.

The Challenge

Previous roof colors were warm with a yellow hue bias matching the brick in a somewhat monochromatic manner.  Which is a typical exterior color scheme. monochromatic-like.

The new charcoal gray roof color created a large spectral gap between the brick color and the roof. The color relationship changed from monochromatic-like to levels of color contrast:

  1. The warm/yellow brick to the cool/blue roof.
  2. The light value brick to the darker value roof.

The Color Solution

To bridge the gap,  it was necessary to add more color to shore up and round out the light/warm/yellow to dark/cool/blue color relationship.  Objective was a cohesive color scheme instead of a curb appeal story of dramatic and discordant color relationships and contrasts.

The opportunities to add more color to create a well-rounded color scheme were few on this facade. Just the door and the shutters. Which means it was critical to get the colors right. Landscaping and light fixtures play supporting roles but the shutter/door color is key.

And here’s the (virtual) solution.

How To Pick Roof Color - Let Hue Bias Be Your Guide

Brick, wood, metal  -all surfaces and substrates- have a definitive hue bias. The hue bias of the brick, for example, is no different than if it were painted siding.  Still using the brick as an example, its what I referred to before a permanent fixed or non-transient exterior element. And its from the permanent fixed, non-transient elements that you build exterior color schemes. Because roofs, gutters, shutters, doors, etc. may come and go but youll never replace the brick.

It would have been a better plan to coordinate the roof color with the hue bias of the brick but thats not how this scenario played out.  Once the new roof and gutters were installed, the homeowner suspected the color choices he made were a mistake.  No use looking at it that way.  Instead, see it as the challenge it is and find a way to make it work.

With color, theres always a way to make it work.

As mentioned, gutters were new too and the color choice, sand pebble clay, wasn’t working either.  Painting the gutters was an option but I thought unnecessary because the sand pebble clay could work.  The new color scheme of creamier trim color, the color of the brick, and a cinnamon-stained door all tie together and harmonize with sand pebble clay.

Distributing some of the heavy black/blue/gray from the roof via navy-black (Inkwell) painted shutters, black fixtures and accessories creates balance. The color family created with the brick, door, trim and gutters is also balanced. Juxtaposed, the two are a cohesive, technically correct and balanced exterior color scheme. It works.

This took me a bit to figure out.  Im always suspect of designers who say they know exactly what color, what to do, as soon as they see a room or house. Because I dont think you can instantly know. If for no other reason than there are always at least three solutions to every color challenge. It requires time to define and determine.

An important takeaway is you do not have to narrowly align (or match) hue bias or color temperature. Color relationships and true color design is about contrast as much as alignment. Which one is better depends entirely on each unique room or house.

Another takeaway is I did this virtually.   eColor Consultations and virtuals are possible and incredibly efficient.

You really can do this!  Read these other blog posts and add to your color skill set.

Leave a Reply