Residential Roofing Accessories

Residential Roofing Accessories

Attic Vents

  • Remove excess heat and moisture to protect roof from premature deterioration
  • Help prevent roof rot in your attic or roof deck
  • Minimize peeling and extend the life of exterior and interior paint
  • Limit the growth of harmful mold
  • Safeguard your attic possessions against mildew damage
  • Guard against ice damming in harsh winter climates
  • Possibly reduce excessive heating and air conditioning costs

Certainteed Ridge Vent

  • Works year-round to ventilate the attic
  • Provides evenly distributed ventilation along the entire underside of the roof
  • Slim design for visual appeal
  • Provides a higher volume of airflow per square foot of attic area than any other fixed-vent system
  • Design maximizes airflow across the entire underside of roof sheathing
  • Residential Roofing Accessories
  • Changes in wind direction have no significant effect on vent performance
  • Wind driven rain resistant to 110 MPH

Attic Intake Vents

After the hot air leaves or diminishes, the cool air moves in to create balance through intake vents. We offer the following product categories:

Staples

A-11 Series

GSN Series

Pipe Collars

Galvanized Base No-Calk® Roof Flashings

  • Slides over pipe — for pitch to 40 degrees.
  • Rustproof, stamped galvanized, 24 or 28 gauge.
  • Non-fading sealing collar.
  • Rated 180°F continuous heat.
  • ESM Flashings (only) have collar and base separate to allow for easier installation.
  • Approved for Type B installations.
  • Not for hot-mopped or built-up roofs.
  • Do not use petroleum based products on collars.

Aluminum Base No-Calk® Roof Flashings

  • lides over pipe — for pitch to 40 degrees.
  • Rustproof .032 stamped aluminum standard base.
  • Non-fading sealing collar.
  • 18 x 18 bases for code required areas.
  • Rated 180°F continuous heat.
  • Approved for Type B installations.
  • Not for hot-mopped or built-up roofs.
  • Soft aluminum base (18 x 18) allows for easy molding to tile roofing.
  • Do not use petroleum based products on collars.

Thermoplastic Base No-Calk® Roof Flashings

  • Slides over pipe — for pitch to 45 degrees.
  • Non-fading and non-cracking, rigid black thermoplastic base.
  • Non-fading, sealing collar.
  • Do not use petroleum-based products on plastic bases or rubber collars.
  • 18 x 18 bases for code required areas.
  • Rated 180°F continuous heat.
  • Approved for Type B installations.
  • Not for hot-mopped or built-up roofs.

Flex-Flash™Roof Flashings

  • Slides over pipe for pitch to 45 degrees.
  • 100% completely flexible/foldable.
  • Do not use petroleum-based products on rubber bases or rubber collars.
  • Non-fading TPR base and collar.
  • No caulking needed.
  • Rated 180°F continuous heat.
  • Not for hot-mopped or built-up roofs.

All-Flash® No-Calk® Highrise® Roof Flashing

  • Slides over pipe for pitch 10 to 60 degrees.
  • Do not use petroleum based products on plastic bases or rubber collars.
  • Ring on collar tears off, allowing flashings to seal different pipe diameters.
  • Rated 180° continuous heat.
  • Not for hot-mopped or built-up roofs.
  • Non-fading, non-cracking and non-rusting rigid black TPE base and sealing collars.
  • Approved for Type B installations.

Master Flash® Roof Flashings

  • Slides over pipe — for pitch to 45 degrees.
  • Use silicone sealant between base and surface, and secure with sheet metal screws.
  • Multi-size pipe sealing range.
  • Molds to metal, plastic, etc.
  • Non-fading EPDM collar.
  • Rated 212°F continuous heat.
  • Approved for Type B installations.

Rain Collar for No-Calk® Roof Flashings

  • Use as a protective water shield (slides down over pipe).
  • No caulking needed.
  • Do not use petroleum based products on rubber collars.
  • Non-fading collar material.

Tools

All the residential roofing tools you will need including:


Leave a Reply